Daylight Harvesting Light Sensor Motion Sensor
Model:ENSA-MS4
Overview
The ENSA-LC2 can be augmented by an ENSA-MS4 microwave motion sensor to include motion detection control and standby dimming, alongside daylight harvesting control. If the ENSA-LC2 detects sufficient ambient light levels, controlled lights remain off, regardless of motion detected by the ENSA-MS4. When ambient light levels fall below the set target, the ENSA-MS4 switches the light on upon detecting movement. If ambient light levels are below the set target, after the last detected motion the ENSA-MS4 will switch off after a standby period. The standby delay period and standby brightness levels are configurable on the ENSA-MS4.
Add three step energy saving to any light with sensor switches:
1) Daylight sensor: Activates motion sensor when lux levels fall below limit
2) Motion sensor: Detects movement, turns light on only when necessary
3) On-timer: Light-on duration is set only as long as is required
Product features:
• Automatically activate and deactivate lighting for energy efficiency
• Adjustable sensors: Daylight (3~50lx) / Motion (1.5~10m) / On-timer (10s~30min)
• 360° arc / 10m microwave detection
• Wall mount angle adjustable, for indoor use only
Add three step energy saving to any light with sensor switches:
1) Daylight sensor: Activates motion sensor when lux levels fall below limit
2) Motion sensor: Detects movement, turns light on only when necessary
3) On-timer: Light-on duration is set only as long as is required
Product features:
• Automatically activate and deactivate lighting for energy efficiency
• Adjustable sensors: Daylight (3~50lx) / Motion (1.5~10m) / On-timer (10s~30min)
• 360° arc / 10m microwave detection
• Wall mount angle adjustable, for indoor use only
| Specifications | |
|---|---|
| Daylight Sensing | 5lx / 10lx / 30lx / 50lx / Disabled |
| Daylight Sensor | Yes |
| Detection Sensitivity | 100% / 75% / 50% / 25% / 10% |
| Dimensions | 101 x 52 x 26mm |
| Ingress Protection | IP20 |
| Input Voltage | 220 ~ 240VAC 50 ~ 60Hz |
| Max. Rated Load (Resistive/Inductive) | 1200W / 800W |
| Motion Detection Area | 360° circle |
| Motion Detection Range | Ø16m x 10m |
| Motion Detection Speed | 0.5 ~ 3.0m/s |
| Motion Sensor Type | Microwave |
| Mounting Type | Wall/Ceiling |
| On-timer Delay | 10s / 30s / 90s / 3min / 20min / 30min |
| Operating Environment | -35° ~ 70°C |
| Power Consumption (Sensing Mode) | 0.5W |
| Recommended Installation Height | 1.5 ~ 10m |
| Stand-by Dimming | 10% / 20% / 30% / 50% |
| Stand-by Period | 5s / 5min / 10min / 30min / 60min / Disabled |
| Warranty (Years) | 3 |